Reviews
Pin V2 CLEAR
$269.00
Shipping calculated at checkout.
1. Color:
CLEAR/BLUE
CLEAR/GUNMETAL
CLEAR/GREEN
CLEAR/GOLD
CLEAR/PINK
CLEAR/PURPLE
CLEAR/RED
CLEAR/TEAL
CLEAR/SMOKE
CLEAR/ORANGE
2. Select kit size
Free U.S. shipping
Processing 1–3 business days
Product Details
Clear Series is printed on premium transparent air-release wrap film — 3M IJ180mC-114 — with a UV-protected cast laminate.
Unlike traditional opaque graphics, your vehicle’s paint shows through the design, creating a more subtle, paint-integrated finish.
Because the film is transparent, the final look can vary depending on your paint color, finish, lighting, and viewing angle.
How To Measure
Measure your roof as Width × Length:
Width: Door to door
Length: Top of the front windshield to the beginning of the rear glass.
Important: Choose a kit slightly larger than your measurements to leave enough material for alignment, installation bleed, and trimming.
Color Guide
White areas shown in the product preview become transparent once installed, while the colored areas act as a translucent tint over your vehicle’s paint.
Lighter paint colors create a more pronounced, higher-contrast look.
Darker paint colors create a more subtle effect.
On black or very dark paint, the design may be extremely subtle.
For the most predictable result, choose a design in the same color family as your vehicle — for example, red on red or blue on blue.
Questions about your color? DM us on Instagram @trplstyle.
Installation
Prep the Surface
Wash your roof thoroughly — remove all dirt, wax, and residue.
Wipe down with isopropyl alcohol to ensure a clean, oil-free surface.
Dry completely before applying the wrap.
Position the Kit
Unroll the kit and lightly tack it into place using masking tape at the edges.
Center the design and confirm placement before removing the backing.
Apply the Wrap
Peel the backing a little at a time, starting from one side.
Use your squeegee to apply pressure from the center outward, pushing out any air bubbles.
Work slowly and steadily — try not to stretch the vinyl.
Use light heat if needed to soften the material for tricky curves.
Finishing Touches
Trim the edges carefully using a fresh blade.
Seal down the edges with firm pressure (and optional heat).
Tips
If you’re unsure — get it professionally installed.
Original vs Clear Series
What is the difference between the Original Series and Clear Series roof kits?
The biggest difference is how the design interacts with your vehicle's paint color.
Original Series
Our Original Series is printed on premium white wrap film. This creates bold, vibrant colors and a consistent appearance regardless of the color of your vehicle.
Clear Series
Our Clear Series is printed on transparent wrap film. Instead of covering your roof color completely, your vehicle's paint becomes part of the final design. This creates a more subtle, integrated appearance that can vary from vehicle to vehicle.
Because the Clear Series is transparent:
Your roof color will influence the final appearance.
White areas shown in product images will be transparent once installed.
Dark-colored vehicles will generally produce a more subtle look.
Light-colored vehicles will generally produce a brighter, higher-contrast look.
If you're looking for the boldest and most consistent appearance, choose the Original Series.
If you're looking for a more unique, paint-integrated look where your vehicle's color becomes part of the artwork, choose the Clear Series.
Super easy to install
I had finished my build with a new color but still felt like it was missing something. I decided to try out the teal clear v2 and man. It did not disappoint. Super easy to install, shipped pretty quick and no trouble along the way.
Da9zay
Transparent film
UV-protected laminate
Air-release adhesive
Install & trim to fit
How to order
Four quick decisions get you from roof measurement to a kit that gives your installer enough material to align and trim cleanly.
Measure your roof
Measure width door-to-door and length from the top of the windshield to the beginning of the rear glass.
Match color family
For Clear Series, choose an ink color close to your paint family for the most predictable blend.
Order slightly oversized
Choose a kit slightly larger than your measured roof so you have installation bleed for alignment and trimming.
Finish the roof
DIY in an afternoon if you're experienced with vinyl, or take the kit to a local wrap professional.
Clear Series color rule
Match the ink to your paint family.
For the most predictable results, choose a design color in the same color family as your vehicle. Red paint → red artwork. Blue paint → blue artwork. The translucent ink enriches the color underneath instead of fighting it.
Expect variation — that's part of the Clear Series.
Paint finish, lighting, body color and viewing angle can all change how pronounced the design appears.
BUY NOW →
Your paint becomes part of the artwork.
Instead of laying an opaque graphic over your roof, Clear Series lets the car's paint show through the artwork. The result reads less like a sticker and more like a layered custom finish.
Transparent base
White areas in the preview disappear on the car, allowing the roof color to show through.
Color-reactive look
Light paint creates stronger contrast. Dark paint creates a subtler, ghosted effect.
Built for wrap installs
Premium air-release cast film plus protective laminate helps make installation cleaner and more predictable.
Your Build Wasn’t Made to Blend In.
Pick the roof kit. Make it yours. Join the club.
BUY NOW →
How to install your roof kit.
Treat it like a premium cast wrap install: surface prep first, alignment second, pressure and heat only where needed.
01 MEASURE FIRST
Door-to-door across the roof, then windshield to rear glass.
02 CLEAN THE SURFACE
Remove dirt, wax and residue; finish with isopropyl alcohol.
03 POSITION + APPLY
Center the design, peel gradually and squeegee outward.
04 TRIM + FINISH
Trim edges carefully and use light heat where needed.
FULL INSTALL GUIDE
04 STEPS / DIY OR PRO
DIY OR PRO INSTALL — BOTH WORK.
Unused kits are eligible for the 30-day return policy; installed kits are not.
Not confident with vinyl?
Bring the kit to a local wrap professional. The design is supplied oversized specifically so it can be aligned and trimmed to your roof.
BUY NOW →
FULL INSTALL GUIDE
04 STEPS / DIY OR PRO
REAL BUILDS. REAL REACTIONS.
Built by Trpl. Proven by the Club.
Reviews
EVERYTHING TO KNOW BEFORE YOUR ROOF CHANGES THE WHOLE CAR
Straight Answers. No Guesswork. Just What You Need to Know.
01
No. TRPL kits use premium, vehicle-grade cast wrap film with a protective laminate for a smooth, professional finish. With proper surface preparation and careful installation, the artwork looks clean, intentional, and integrated with the car.
02
03
The final look depends on your vehicle’s paint color. Lighter roofs typically create a brighter, higher-contrast result, while darker roofs produce a deeper, more subtle finish. Any transparent areas shown in the preview will allow your original paint color to remain visible.
04
Yes. Many customers install their kits at home. Each product page includes step-by-step installation instructions covering surface preparation, positioning, application, and trimming. For the best result, we recommend working with a second person and taking your time. A professional installer is also a great option if you are not comfortable applying vehicle wrap film yourself.
05
Each kit is made from premium air-release vehicle wrap film with a UV-protective cast laminate. The air-release adhesive helps reduce bubbles during installation, while the laminate protects the artwork from sun exposure, weather, and everyday wear.
06
Measure your roof from door to door, then from the top of the windshield to the beginning of the rear glass. Choose a size that provides a little extra material for positioning and trimming, and confirm the available size options listed on the product page for the design you choose.
07
Yes. TRPL roof kits are designed to be removable, making them a flexible alternative to permanent paint. For the safest removal, follow the recommended instructions or work with an experienced vehicle-wrap installer, as the vehicle’s age, surface condition, temperature, and removal technique can all affect the process.
Orders are typically processed within 2–5 business days, followed by an estimated 1–5 business days for U.S. delivery. You’ll receive tracking information by email once your order ships. Processing and delivery may take a little longer during sales, promotions, or holidays.
Return Policy
Wrong size or color? You have 30 days from delivery to return it for store credit toward your correct size.
Item arrived damaged or incorrect? Contact us anytime within 30 days for a full refund or free replacement — no questions asked.
Changed your mind? You have 7 days from delivery for a full refund to your original payment method. (product must be unused in its original packaging)
STILL UNSURE? SEND TRPL YOUR ROOF MEASUREMENTS + VEHICLE MODEL BEFORE ORDERING.
JOIN THE UNDERGROUND CLUB
Ready to make your paint part of the design?
Choose the Clear Series design that works with your paint and create a finish that feels completely custom.
SHOP CLEAR COLLECTION
